General; Width 2,550 mm, Total Length 8,770 mm, Fifth wheel height when loaded 950 - 1450 mm
■ Chassis; It is designed according to international transportation standards for trouble-free transportation under full load and in all types of ground conditions. Overloading has also been taken into consideration in strength calculations. It is a chassis manufactured from two high-strength “I” section bodies.
■ Axle; Each has a carrying capacity of 3x10 tons.
■ Axle Lift; Front axle lifting and lowering system located inside the cabin.
■ Mechanical Leg; Double-speed mechanical legs, each with a carrying capacity of 25 tons.
■ King Pin; King Pin manufactured from high-strength forged steel and compliant with 2” SAE/DIN standards.
■ Brake; The brake components used are in accordance with EU standards and are designed from WABCO brand products.
■ Rear Ramp; Rear legs with pneumatic-hydraulic pistons, manufactured from 160 NPU.
■ Air Suspension; It consists of suspension air bags, a limiting level valve, ramp lever, lifting coil, parabolic Z leaf springs and shock absorber components that limit excessive axle movement.
■ Electrical System; It is designed according to European standards. WABCO products are used in the equipment. Automatic brake ratchets, brake valve, brake chambers (30-size cylinders), brake linings (394x210 mm), and axle brakes are equipped with an EBS system. There are two replaceable and protected brake sockets at the front of the trailer.
■ Tires and Rims; 8+1 tires in sizes 235/70 R 17.5, 245/70 R 17.5, 295/60 R 22.5, 12 R 22.5, 315/80 R 22.5 are used.
■ Paint; After the surface of the trailer is sandblasted, it is carefully cleaned with chemical liquids, two coats of acrylic paint are applied over epoxy primer, and the painting process is carried out according to RAL codes.